Welcome to the official website of the Taian Haishu Machinery Co., Ltd.,Service Phone:0086-0538-8606169ChineseEnglishSitemapEnterprise MailboxContact Us

Sale Of CNC Lathe

Senior Expert Of CNC Lathe

Global Service Hotline

0086-0538-8606169

Notice:
Warm congratulations "HAISHU" brand CNC machine tool exports reached 40 countries. They are: the United States, Britain, Germany, Sweden, Italy, Russia, Turkey, New Zealand, Colombia, South Korea, Bahrain, South Africa and other countries. "HAISHU" brand has been known at home and abroad.
Contact Us
Global Hotline:
+86-538-8606169

Taian Haishu Machinery Co.,Ltd.

Telephone: +86-538-8606169

Fax: +86-538-8606169

Address: Zhouwangzhuang Village, Shankou Town

             Taian City Shandong Province China

Current Location:Home Page » Service » Common Question
CNC lathe turning large hollow workpiece how to adjust the center frame?
From:Taian Haishu Machinery Co.,Ltd. Updatetime:2016-9-27 9:03:42 Views:
In the turning length, diameter relatively large hollow workpiece inner hole, the end surface, the need to use the center frame. If the center frame adjustment is not good, the axis of the workpiece axis and the machine tool spindle axis do

  CNC lathe turning large hollow workpiece how to adjust the center frame?
        In the turning length, diameter relatively large hollow workpiece inner hole, the end surface, the need to use the center frame. If the center frame adjustment is not good, the axis of the workpiece axis and the machine tool spindle axis does not coincide, the processing will produce end face hollow and bulging belly and hole taper error. Severe, the workpiece from the chuck in the prolapse, resulting in accidents.
        When installing such a workpiece. One end of the workpiece with three-jaw chuck or four-jaw chuck, the other end, on the center shelf. And then in the hole in the workpiece plug a piece of wood or in the workpiece end with butter paste a piece of paper, tailstock tip on the top of the wood or paper, the choice of a lower spindle speed, the workpiece a week or two , Then the top of the board or paper to draw a circle, and then adjust the center frame three care, so that the center of the circle is the top of the tip, so basically the workpiece center line and the spindle axis of the machine tool Basic overlap. After semi-finishing, such as measuring the end surface flatness and hole cylindrical tolerance, and then the center frame of the three care for minor adjustments to be eliminated.

 

  Next:What is a turning center?【Close】
News
Product

CNC lathe research and development, every problem we can not be ignored!

How to make my machine have a longer service life?

How to make the equipment have higher production efficiency?

How to ensure that the machine is simple to learn?

... ...

Learn CNC lathes

From the beginning our website!

Global Service Hotline:+86-0538-8606169

Attention to HaiShu Ali Shops Sina Weibo Tencent Weibo WeChat WeChat
Taian Haishu Machinery Co., Ltd.
Address:Zhouwangzhuang Village, Shankou Town Taian City Shandong Province China
Telephone:+86-538-8606169
Fax:+86-538-8606169
Copyright © 2015 HaiShu All rights reserved.
XML 地图 | Sitemap 地图